American Power Conversion
www.apc.com                                   5/15/2000 baudrate.txt
**********************************************************************
Release Notes for:

Changing the baud rate on MasterSwitch (AP9211).

To change the baud rate to 9600 do the following:

1. Connect serially or via Telnet to the MasterSwitch.
2. At the User Name prompt type "apc" or if you have changed the user
   name enter that instead.
3. At the Password prompt type "apc -9600" or if you have changed the
   password enter that instead.
4. If you are connected serially then you will be prompted to change
   your baud rate, do so and press <ENTER>.  The baud rate will stay
   at this setting.
5. You can change the baud rate to 2400, 9600, and 19200 using this
   method.